Description
Buyer Note:
[With a high-viscosity double-sided tape on the back, you can just peel it off and paste it. Please align it and paste it. It’s hard to peel off after pasting it]
[Usage method and precautions]: Please wipe the dust on the surface of the guitar with a piano cloth. Wipe dry or use alcohol to clean up the alcohol and then paste it. If the old guard is torn off and there is residual glue, you can also use alcohol or others. The thinner is cleaned up and then pasted. It should be noted that if the guitar surface has been treated, polished, waxed oil, etc., the guitar panel has lubricating oil. Not dry will cause the glue viscosity to decrease. The guard plate will be unstable. This needs to be paid attention to after pasting. Press the edge firmly and try not to play it right away for a day or two so that the guard plate fully fits the guitar panel. You can also use some items such as books and the like to help it. The guard plate is made of soft rubber and pay attention to the temperature. Overheated and cold weather temperature will cause the guard plate to warp and deform, try to put it in a ventilated place. If the edge warping is normal, you can add a small amount of liquid glue by yourself, such as B-7000. Use a small piece of paper to drop a small amount of glue on it. Enter the gap between the fender and the guitar so that it will be more even and then take out the small piece of paper
[Guard size]: inner diameter 125mm, thickness is only about 1-1.5mm, moderate thickness does not affect the tone
FEEDBACK
Every
piece of feedback is what drives us forward.It is true love of you.
(A)
If
you are satisfied with your purchase, we sincerely hope that you will give us a positive feedback.
And
we
’
ll
give you
a
positive feedbac
k in return.
(B) If you are dissatisfied with your purchase, please contact us prior to submitting a neutral or negative feedback.
We will respond to you within 24 hours and work with you until you are satisfied.
Many thanks for this.
Best wishes for a nice day.